PIC32MX675F512L

Product Features

        80MHz/105DMIPS, 32-bit MIPS M4K Core
        USB 2.0 On-The-Go Peripheral with integrated PHY
        10/100 Ethernet MAC with MII/RMII Interfaces
        4 Dedicated DMA Channel for USB OTG
        5 Stage pipeline, Harvard architecture
        MIPS16e mode for up to 40% smaller code size
        Single cycle multiply and hardware divide unit
        32 x 32-bit Core Registers
        32 x 32-bit Shadow Registers
        Fast context switch and interrupt response
        512K Flash (plus 12K boot Flash)
        64K RAM (can execute from RAM)
        8 Channel Hardware DMA Controller
        Flash prefetch module with 256 Byte cache
        Lock instructions or data in cache for fast access
        Programmable vector interrupt controller
        Fast and Accurate 16 channel 10-bit ADC,
        Max 1 Mega samples per second at +/- 1LSB, conversion available during SLEEP &   IDLE
        RUN, IDLE, and SLEEP modes
        Multiple switchable clock modes for each power mode, enables optimum power settings
        iFlow Trace: Non-intrusive Hardware Instruction Trace port (5 Wires)
        8 hardware breakpoints (6 Instruction and 2 Data)
        2 wire programming and debugging interface
        JTAG interface supporting Programming, Debugging and Boundary scan
        Fail-Safe Clock Monitor – allows safe shutdown if clock fails
        Hardware RTCC (Real-Time Clock and Calendar with Alarms)
        2 Internal oscillators (8MHz & 31KHz)
        Watchdog Timer with separate RC oscillator
        Pin compatible with 16-bit PIC® MCUs

        Serial Communication Modules allow flexible UART/SPI/I2C™ configuration